Free Consult
7 min. readIndustry News, Manufacturing

Output at a Five-Year High. The Margin Needs Watching: This Month in Manufacturing

Worker wearing safety glasses and gloves measures a metal cylinder in a machine workshop.

Factory output hit a five-year high in October. For about six in ten small manufacturers, the profit from this output is a different conversation.

The October ISM Manufacturing PMI registered 55.5 percent, 1 point above September and the tenth consecutive month of expansion. The Production Index rose 2.3 points to 59.0 percent, the strongest reading since November 2021. New orders held at 55.5 percent. The demand signal is not ambiguous. For mid-market manufacturers running $10M to $200M in annual revenue, the operational question for November 2026 is whether the shop floor, the workforce, and the cost structure are equipped to convert this order volume into sustainable margin.

This issue covers four things happening at once: the expansion's durability, the tariff layer sitting beneath the strong headline numbers, a labor market posting openings the market is not filling, and what the midterm results mean for trade policy heading into 2027.

In this issue

  • October ISM PMI at 55.5%: production hits its highest reading since November 2021
  • September factory orders reach $677.2B for the third consecutive monthly gain
  • 60% of small manufacturers absorbing tariff cost increases of 10% to 25%
  • Primary metals gross margins fell 5.8 percentage points in 2025 despite rising sales
  • Manufacturing job openings at 584,000 vs hires at 313,000. The gap grew by 88,000 in one month
  • Midterms shift oversight picture on tariff authority and USMCA review
  • Reshoring: contract shops quoting projects nearly doubled, from 16% to 33%
  • 43% of collected manufacturing data is used effectively, per Rockwell Automation's 2026 survey

Demand Signals

The orders picture this month is as clean as at any point in the expansion cycle. The Census Bureau's latest manufacturing report, released November 3, showed new orders for manufactured goods rising $12.2 billion to $677.2 billion in September, the third consecutive monthly gain. Excluding transportation, orders rose 1.3 percent. Excluding defense, 2.0 percent. The breadth matters as much as the total. When gains are spread across machinery, fabricated metals, and components rather than concentrated in aircraft or defense, the signal reflects underlying industrial demand, not a timing quirk in a single category.

The ISM data confirms the picture. The Production Index at 59.0 percent is not a marginal reading. The index reflects broad factory floor activity expanding at a faster rate than any month since the post-pandemic spike. New orders at 55.5 percent and backlog at 54.6 percent suggest the pipeline behind the headline number is intact. For a mid-market manufacturer evaluating staffing, capital spending, or procurement commitments, the demand signal is durable, not a one-month anomaly.

The Cost Squeeze

The demand signal and the margin signal are running in opposite directions.

Small Business Majority's Voice of Main Street survey found 60 percent of small businesses are facing higher costs as a result of tariffs, with most reporting increases between 10 and 25 percent. For manufacturers relying on imported steel, aluminum, components, or finished inputs, the tariff exposure translates directly into input costs with limited means to pass them through without losing customers.

Abrigo's October analysis of private-company financial statements makes the dynamic visible in precise numbers. The four industries with the greatest combined tariff and energy-related cost exposure recorded a median 3.1-percentage-point improvement in sales-growth rates alongside a 166-basis-point decline in gross margins. Primary metals was the most extreme case: sales growth improved 6.7 percentage points while gross margins contracted 583 basis points. This is a business growing its top line while watching its take-home shrink simultaneously. For a leaner operation without the treasury resources of a larger company, this math is fragile. As Abrigo's Senior Consultant Rob Newberry noted, small businesses have less margin to absorb tariff impacts on input costs, which creates larger year-over-year swings in financial performance.

The ISM Prices Paid Index slipped 2.7 points in October to 75.2 percent. The 2.7-point relief is welcome. A reading of 75.2 still means the overwhelming majority of purchasing managers are reporting higher prices for inputs. The Prices Index has been above 70 for most of this expansion.

Labor: The Gap Is Widening

The Bureau of Labor Statistics JOLTS data for September put manufacturing job openings at 584,000, up 54,000 from August. Hires fell to 313,000 from 347,000. The opening-to-hire gap grew from 183,000 to 271,000 in a single month. These are industry-level aggregates, not a universal description of every employer's experience, but the direction is consistent with what manufacturers on the floor are reporting. Manufacturing employment sits at 12.652 million, slightly above the 2017-2019 average, and the sector is adding jobs. The constraint is in the pipeline into specific roles.

The 2026 Reshoring Survey found most manufacturers already rate welders, machinists, and maintenance techs as difficult or at a crisis level to fill. Reshoring is adding to this pressure. The share of contract manufacturers actively quoting reshoring projects nearly doubled in 2026, from 16 to 33 percent, and FDI-related reshoring jobs totaled 247,000 in 2025 with 2026 on pace to exceed the prior year. This is the same dynamic covered in last week's Industrial Equipment and Machinery issue: more work coming in, the same constrained pool of skilled workers available to handle the volume.

What’s Coming

The midterm results introduced a new variable for manufacturers thinking past Q4. With a changed congressional balance, presidential tariff authority faces heightened oversight and the USMCA review (particularly automotive rules of origin and cross-border production) will receive more attention in 2027. Edelman's post-election analysis calls out trade and North American supply chains as the specific zone of intensified scrutiny. Supply Chain Management Review was more direct: uncertainty about trade policy makes long-term supply-chain and manufacturing planning extremely difficult. The practical effect for manufacturers is a more complex investment environment heading into 2027. Companies evaluating 12-to-24-month sourcing or capital decisions now have another variable to model.

The manufacturers who entered 2026 with current operational data (precise cost-per-unit, actual landed cost on inputs, real inventory visibility) have an advantage in making those calls. The ones running on aging assumptions face a harder road. The same data problem shows up in AI adoption. Rockwell Automation's 2026 State of Smart Manufacturing found only 43 percent of collected manufacturing data is being used effectively, even as nearly 90 percent of manufacturers are using or planning to use AI and machine learning. The constraint is not the AI model. The constraint is the operational data foundation. Fragmented systems produce fragmented data, and AI built on fragmented data produces unreliable outputs. For a mid-market manufacturer, fixing the data foundation is not a future problem. Getting the foundation right is the prerequisite for any AI investment being worth making.

The Bottom Line

Ten months of expansion and a production index at a five-year high are not signals to dismiss. The expansion is real. The challenge for November 2026 is converting strong demand into actual margin, not revenue alone. The manufacturers moving through this environment most effectively share one characteristic: they know their numbers. Per-unit cost, landed input cost, labor variance, inventory position. All current, all visible. The ones discovering the tariff effect at year-end close, when the books settle, are the ones who will find the expansion did not pay off as the order book suggested.


In case you missed it


Ready to know your numbers?

Mid-market manufacturers running strong order volume but uncertain on margins have one consistent problem: systems not connecting operational data into a single view. If your team is reconstructing cost-per-unit from multiple sources, or if your inventory position and landed-cost calculations live in spreadsheets alongside your operations data, the gap between what the order book says and what the books show at close is predictable.

Third Wave helps mid-market manufacturers build the operational foundation to manage growth cleanly. Start with the assessment. Ten minutes identifies where the biggest gaps are.

Get in Touch